Call Us | (408) 515-2525

Professional Exterior Finishes

 

Stucco Exterior Design Services

image with caption

Custom Stucco Home Exterior Designs

What’s Exterior Stucco Design?

? Stucco is an very cool, modern, and often “sea-side” exterior finish because of it’s durability. It’s aesthetically textured, making your home stand out with more flare … Some options and popular chices with Stucco landscaping:

  • Exterior Home Finish
  • Smooth Finish Options
  • Variety of Finish Color Options

Check out this link for a sample of Stucco Color Options. or view the gallery below for a color palette image.

See below a more detailed summation of Custom Exterior Stucco Design:

Stucco or render is a material made of an aggregate, a binder, and water. Stucco is applied wet and hardens to a very dense solid. It is used as a coating for walls and ceilings and for decoration. Stucco may be used to cover less visually appealing construction materials such as concrete, cinder block, or clay brick and adobe.

The difference in nomenclature between stucco, plaster, and mortar is based more on use than composition. Until the later part of the nineteenth century, it was common that plaster, which was used inside a building, and stucco, which was used outside, would consist of the same primary materials: lime and sand (which are also used in mortar). Animal or plant fibers were often added for additional strength. In the later part of the nineteenth century, Portland cement was added with increasing frequency in an attempt to improve its durability. At the same time, traditional lime plasters were being replaced by gypsum plaster.

Traditional stucco is made of lime, sand, and water. Modern stucco is made of Portland cement, sand, and water. Lime is added to increase the permeability and workability of modern stucco. Sometimes additives such as acrylics and glass fibers are added to improve the structural properties of the plaster. This is usually done with what is considered a one-coat stucco system, as opposed to the traditional three-coat method.

Lime stucco is a relatively hard material that can be broken or chipped by hand without too much difficulty. The lime itself is usually white; color comes from the aggregate or any added pigments. Lime stucco has the property of being self-healing to a limited degree because of the slight water solubility of lime (which in solution can be deposited in cracks, where it solidifies). Portland cement stucco is very hard and brittle and can easily crack if the base on which it is applied is not stable. Typically its color was gray, from the innate color of most Portland cement, but white Portland cement is also used. Today’s stucco manufacturers offer a very wide range of colors that can be mixed integrally in the finish coat. See reference below.

Alexander & Sons Stucco Landscaping Services Portfolio

Landscaping and Exterior Design Services

Know what you need?

• Arbor – Pergula Designs

• BBQ – Barbecue Designs

• Bricks Designs

• Driveway Designs

• Flagstone Designs

• Foundation Designs

• Patio Landscape Designs

• Pavers Design Services

• Retaining Wall Designs

• Sidewalk Landscape Designs

• Decorative Stamped Concrete

• Stones Slate Designs

• Stucco Design Services

• Water Fall Feature Design

• Contact Us Today!

Wikipedia -Stucco Design